Kunststoffteile als Nachbau – passend für VW T4

Your T4, your cockpit: This accurate-fit trim panel is suitable as a replacement or addition for the storage compartment in the 2‑DIN slot of the large centre console and is suitable for VW T4 – clean, stable and visually based on the original. Whether as a replacement for damaged parts or to retrofit additional storage space: This trim panel allows the double DIN cut-out to be closed neatly and the dashboard looks tidy again. The surface texture is intentionally slightly rough and is based on the original trim panels in the upper area of the dashboard. Compatible vehicle variants: VW T4 Caravelle VW T4 Multivan VW T4 Transporter VW T4 double cab (Doka) VW T4 pickup Details: Suitable for vehicles suitable for VW T4, model years 1990–2003 OE reference number (for comparison purposes only): 7D0819144A Version for large centre console (lower section) with 2‑DIN slot Material: robust plastic, manufactured using high-quality 3D printing Colour: black (visually based on the original) Layer height: approx. 0.2 mm Why this trim panel? Original covers are often damaged or missing. This reproduction restores the interior functionally and visually – ideal for clean integration of a storage compartment, radio or additional components.

Wir haben den unteren Deckel für die hintere Sitzbank komplett neu konstruiert und an entscheidenden Stellen – insbesondere an den Einrastnasen – verstärkt. Zusätzlich ist der Deckel auf der Rückseite mit breiten Verstrebungen ausgeführt, um die Formstabilität zu erhöhen. Passend für VW T4 mit Sitzen, die im unteren Bereich über ein Staufach verfügen. OE: 7D0 868 231A (nur für Vergleichszwecke).

This 5-piece repair kit made from impact-resistant polycarbonate serves as a replacement for corrosion- and wear-prone small parts between the balance beam and the brake pressure regulator. Press-fit brass threaded inserts provide permanently stable screw connections, and a stainless-steel grub screw enables play-free fixing. The design supports precise, load-dependent function of brake force regulation. The hole for the split pin on the balance beam is approx. 8.2 mm. Solution with this repair kit Polycarbonate parts: corrosion-free, resistant to chemicals and UV, impact-resistant Brass threaded inserts for high pull-out strength and repeatable tightening torque Stainless-steel grub screw (A2) with hex socket – corrosion-resistant Scope of delivery (5 parts) 2 × clamps 1 × transition bracket made of polycarbonate with brass insert 1 × protective cover made of polycarbonate 1 × fastening with stainless-steel grub screw (hex socket, M6) Important installation note: 1. The repair kit must be installed with slight play, according to the original design. 2. The split pin and mounts on the balance beam must be clean, rust-free and smooth-running. 3. There must be no rust residue or burrs between the two plates of the balance beam to avoid stress. Update: 18/10/2025 The spring clamps are now manufactured using precise SLA 3D printing.

The acoustic capsule for the shift linkage is no longer available for many vehicles of this type, although it makes an important contribution to noise reduction. In the area below the gear knob, sealing towards the road is limited by design, which can be noticeable as increased engine and gearbox noise. This reproduction addresses exactly this point: the acoustic capsule is manufactured using 3D printing from robust, heat-resistant polycarbonate and forms a stable outer shell around the shift linkage. This significantly reduces sound transmission from the gearbox tunnel area. If required, the inside of the capsule can additionally be fitted with suitable insulation materials to further increase sound absorption (insulation material not included). In addition to the acoustic effect, the design can also help minimise heat transfer from the tunnel area into the interior. The result is a noticeably quieter driving feel, especially at higher speeds, as well as an overall more pleasant interior climate. Scope of delivery: 1 × acoustic capsule for shift linkage (reproduction) 1 × foam rubber (approx. 650 mm) for sealing the contact surfaces OE reference number (for comparison purposes only): 7D0711545

Your T4, your cockpit: This accurate-fit trim panel is suitable as a replacement or addition for the storage compartment in the 2‑DIN slot of the large centre console and is suitable for VW T4 – clean, stable and visually based on the original. Whether as a replacement for damaged parts or to retrofit additional storage space: This trim panel allows the double DIN cut-out to be closed neatly and the dashboard looks tidy again. The surface texture is intentionally slightly rough and is based on the original trim panels in the upper area of the dashboard. Compatible vehicle variants: VW T4 Caravelle VW T4 Multivan VW T4 Transporter VW T4 double cab (Doka) VW T4 pickup Details: Suitable for vehicles suitable for VW T4, model years 1990–2003 OE reference number (for comparison purposes only): 7D0819144A Version for large centre console (lower section) with 2‑DIN slot Material: robust plastic, manufactured using high-quality 3D printing Colour: black (visually based on the original) Layer height: approx. 0.2 mm Why this trim panel? Original covers are often damaged or missing. This reproduction restores the interior functionally and visually – ideal for clean integration of a storage compartment, radio or additional components.

Many reproductions available on the market are designed purely for appearance. This grille was designed so that it follows the original shape and geometry. In addition, design adjustments were made to reduce flow noise at higher speeds. The edge of the grille is reinforced. Four integrated holes with a diameter of 4.5 mm allow additional fastening to help minimise unintended loosening – for example during off-road use. Details: Suitable for VW T4 Syncro with long front end (from model year 11/1995) Reproduced using a high-quality 3D printing process Material: PETG-CF – dimensionally stable and suitable for vehicle use Colour: black Layer height: approx. 0.2 mm Dimensions: approx. 114 × 122 × 36 mm Weight: approx. 0.08 kg OE reference number (for comparison purposes only): 701807238 Why this grille? An intact ventilation grille contributes to a clean appearance of the bumper and replaces defective or missing original parts. This reproduction provides a precise-fit solution for vehicles with a long front end and is designed for secure fastening.

Important notes 1. Please make sure to watch the product video before purchasing. You can find it directly under “Video” or via this link. 2. The nozzles are supplied without an overpressure valve. If the washer fluid reservoir is filled to the brim, excess water may leak out through the nozzles. If you want to avoid this, you can retrofit a separately available overpressure valve. Why these nozzles matter Vehicles with xenon or gas-discharge headlights pass the periodic inspection under § 50 para. 10 StVZO only with a functional headlight washer system. Missing or non-functioning nozzles can lead to refusal of the inspection sticker. Your benefits at a glance Feature Benefit Optimised fan spray pattern Even wetting without readjustment Plug & play Fit, connect hose – ready to use SLA manufacturing High dimensional accuracy & clean surface Set for left & right Immediate complete replacement of both sides Detailed description These headlight washer nozzles were designed as suitable reproductions for the VW T4. The outer geometry and connection dimensions are based on the series parts, but the outlet channels have been flow-optimised. The result is a stable, even fan spray that reliably wets the headlight surface – without time-consuming adjustment. Compatibility Suitable for VW T4 / EuroVan Short and long front end Model years 1990–2003 Vehicles with factory or OEM-like headlight washer system Suitable replacement for: 701 955 101 – left, unheated 701 955 102 – right, unheated Scope of delivery 2 × headlight washer nozzles (left & right, unheated1) Installation notes: Deltabus blog 1 Existing heater wiring can continue to be used or disconnected. Installation – in under 10 minutes Extend the telescopic cylinders and pull off the old nozzles. Fit the new nozzles until they click audibly into place. Connect the water hose and perform a function test. Note for xenon retrofits For xenon conversions, the washer system must be functional before the periodic inspection. This set provides a practical solution as a suitable replacement for missing or defective nozzles – without expensive new parts. Delta Garage – replacement parts developed in-house, suitable for VW T4.

Valve cover bolt seal, suitable for VW T4 TDI – accurate-fit replacement to help reduce oil leaks Oil leaks in the area of the valve cover bolt (VDD) are among the common age-related issues on many VW T4 TDI engines. The cause is usually an original seal that has hardened or deformed over time, allowing oil to leak at the bolt area. Engines particularly affected are those with engine codes ACV, AHY, AXG, AXL, AJT, AYC, AUF and AYY. Volkswagen originally did not provide an individually available seal for this area, but only replacement of the complete valve cover. This independent reproduction specifically targets the bolt area and enables replacement of the seal without the costly replacement of the entire valve cover. The design is intended for a defined fit and can support the contact pressure in the area of the VDD bolt by design. Details: • Suitable for engine codes: ACV, AHY, AXG, AXL, AJT, AYC, AUF, AYY • OE reference numbers (for comparison purposes only): 074 103 469 P / 074 103 469 F • Application: valve cover bolt (VDD) • Material properties: oil- and temperature-resistant up to approx. 110 °C Benefits: • Replacement of an individual seal possible • Helps reduce oil loss in the area of the valve cover bolt • Precise reproduction to original dimensions • No replacement of the complete valve cover required • Development and manufacturing by Delta Garage Note: This product is a replacement part developed in-house and is not an original part from a vehicle manufacturer. The stated OE reference numbers are used solely for comparison purposes.

Precise-fit solution for the short front end: This precisely 3D-printed grille is a reproduction replacement part, suitable for VW T4 Syncro, and is intended to replace a damaged or missing ventilation grille on the short front end. It is designed for the required airflow guidance and integrates functionally into the intended installation area. While many reproductions primarily focus on appearance, this grille was designed for targeted airflow guidance as well as reducing flow noise and turbulence. The surrounding edge is reinforced. In addition, four mounting holes with a diameter of 4.5 mm are provided to support a secure fit and help prevent unintended loosening, e.g. during off-road use. OE reference number (for comparison purposes only): 701807238 Function: A correctly fitting ventilation grille contributes to targeted airflow guidance in the front end and supports ventilation of the Syncro drivetrain. This replacement part is intended to restore the designed function for vehicles with the corresponding configuration.

The 15-way additional fuse holder strip is installed below the central electrics and is suitable for VW T4 vehicles (Transporter, Caravelle, Multivan, California) from model years 1990–2003. It serves as the factory-provided plug-in position for up to 15 standard blade fuses (ATO/ATC) and enables a neat, fused retrofit of accessories such as seat heating, auxiliary heater, auxiliary lights, cool box or camper conversion – without makeshift or “flying” fuses. OE reference number (for comparison purposes only): 701 937 617 Note: For electrical connection, 2-pole fuse boxes with the OE references 701 937 530 or 1H0 937 530 are required. These are not included in the scope of delivery.

Your T4, your comfort: This accurate-fit trim cover serves as a replacement for the sunroof motor cover and is suitable for VW T4 models. It provides a clean look in the interior and performs the same function as the standard part. If the original cover is damaged or no longer present, this precisely 3D-printed replacement offers a suitable solution. The trim cover blends discreetly into the interior and has an integrated holder for the emergency key. Details: Suitable for VW T4 models with sunroof Manufactured using 3D printing Material: ABS Colour: silver-grey Layer height: approx. 0.16 mm Integrated holder for the emergency key (not included) OE reference number (for comparison purposes only): 7D0877829 Note: An intact cover helps protect the sunroof motor from dust and dirt and contributes to a tidy appearance in the interior. This product is a replacement part from our own production and is not an original part from a vehicle manufacturer.

Accurate-fit reproduction of a nozzle ball for the headlight washer system, suitable for VW T4. Suitable as a replacement for clogged, damaged or missing nozzle balls. The part has been reproduced geometrically and is intended for direct replacement of the existing series part. Manufactured using a high-quality SLA process from hardened, high-strength plastic (PP base) for high dimensional accuracy and durable use in automotive applications. Scope of delivery: 2 × nozzle ball

The sunroof of the VW T4 is an important comfort feature for many drivers – until the small gear in the motor fails. The original part with part number 701959731C can fail after many years, as the plastic loses strength due to ageing, heat and UV exposure. In addition, stiff-running mechanics, e.g. due to dirty or insufficiently lubricated rails, can lead to increased load on the gear. This can result in blocked or jerky sunroof movement. This gear has been reconstructed true to the original and manufactured using industrial SLA on a Formlabs system. A specially selected engineering resin is used, designed for dimensional accuracy, temperature resistance and consistent material properties, and suitable for use in the sunroof motor. Thanks to the precise manufacturing, accurate-fit installation is possible, allowing the gear to be used as a replacement for the original part. To ensure long-term function, the sunroof should be maintained regularly. Clean, well-lubricated guide rails help avoid unnecessary load on the gear. This replacement part is intended to restore sunroof function and is for drivers who value clean fit and reliable mechanics. OE reference number (for comparison purposes only): 701959731C

Hinge strip cover – reproduction, suitable for pop-out windows on the VW T4 California A big thank you goes to the dedicated T4 community – especially Carsten – for support in researching technical details and reference part numbers. This shared exchange made the reconstruction of these rare parts possible. Background The original hinge strip cover as fitted on certain California versions of the VW T4 has not been available for many years. Especially on vehicles with pop-out windows, loss of these parts is a common issue during repair and restoration. As part of the research, the following OE reference numbers were identified, which are used solely for comparison purposes: 701 070 423 – reference for hinge strip rear pop-out window 701 070 423 A – reference for hinge strip side long windows 701 070 423 C / 701 070 423 D – references for the associated covers Reconstructed hinge strip cover Based on original samples, dimensions and technical documentation, this hinge strip cover was completely redesigned and implemented as a modern reproduction. Manufacturing is carried out using a precise SLA process, resulting in high dimensional accuracy and clean surfaces. The cover performs the same function as the original part: it provides defined guidance and coverage in the area of the window hinge strip and supports clean function as well as a cohesive look. Special features Accurate-fit reproduction based on original geometries Suitable for pop-out windows on VW T4 California models Can be used for rear pop-out windows and side long windows (depending on model) Compatible with covers according to OE references 701 070 423 C / D Manufactured in Germany For repair & restoration This reproduction is aimed at anyone who wants to properly repair or restore their VW T4 California close to the original. The goal is to meaningfully complement the spare parts supply for components that are no longer available and to support the long-term preservation of these vehicles.

The trim cover for the interior tailgate release is manufactured as a 3D‑printed reproduction and is suitable for vehicles such as the VW T4. It is intended for tailgates with an inner trim panel in a cardboard version. The part is used to cover the interior tailgate release and is intended to replace missing or damaged covers. Important compatibility note This trim cover is only suitable for VW T4 models with a tailgate inner trim panel made of cardboard (thin version). Not suitable for vehicles with plastic trim on the tailgate. Technical details Use: trim cover for the interior tailgate release Design: 3D‑printed reproduction Suitable for VW T4 with cardboard tailgate trim panel Manufacturing process: 3D printing OE reference numbers (for comparison purposes only): 705829313, 701827557A Note Manufacturing-related surface structures are typical for additively manufactured parts and do not constitute a defect.

Functional protection for the drivetrain: This rubber dust boot is intended to protect the mechanical clutch lever and associated components such as linkage, bearing block and reversing lever. The dust boot helps prevent dirt, moisture and spray water from entering the clutch actuation area. This reduces wear and helps maintain the function of the mechanism over the long term. The part is made from TPU (thermoplastic polyurethane). This material features high flexibility, abrasion resistance and resistance to oil, grease and environmental influences, making it particularly suitable for automotive applications. OE reference number (for comparison purposes only): 02A141728

Replace broken or missing seat belt trim caps on the B-pillar of your vehicle suitable for VW T4 quickly and permanently. This high-quality PETG-CF reproduction blends seamlessly into the original interior thanks to its textured surface and provides a factory-like overall appearance. Attention: Not suitable for vehicles with a belt pretensioner system (recognisable by black additional elements on the belt retractor). Highlights & benefits Accurate-fit design – engineered to original dimensions, suitable for VW T4 Transporter, Caravelle, Multivan & California (model years 1990–2003) without belt pretensioner system. High-strength PETG-CF – carbon-fibre reinforced plastic with high impact resistance as well as temperature and UV resistance. Surface – subtle texture, based on the original interior control elements. 3D printing made in Germany – layer height 0.2 mm for a balanced combination of strength and detail. Plug-and-play installation – fit, click in, done. No modifications required. Compatibility & OE reference numbers (for comparison purposes only) Position OE reference number Application Left 7D0858197 B-pillar seat belt guide, suitable for VW T4 Right 7D0858198 B-pillar seat belt guide, suitable for VW T4 Installation notes Carefully lever off the old cover. Push the seat belt slightly to the side. Position the new trim cap and press in evenly until it clicks audibly into place. Fully pull out and retract the seat belt twice to check correct seating.

This trim cap is a suitable reproduction for the seat belt guide on the B-pillar of VW T4 vehicles. It replaces damaged or missing covers and blends harmoniously into the interior thanks to its textured surface. This is a reproduction replacement part. Vehicle and model designations are mentioned solely to describe fitment. Important note: This product is suitable for VW T4 vehicles with a belt pretensioner system. Not suitable for vehicles without a belt pretensioner system. Highlights & features Accurate-fit reproduction – engineered to reference dimensions for VW T4 vehicles (model years 1990–2003) with belt pretensioner system. PETG-CF material – carbon-fibre reinforced plastic with high dimensional stability, impact resistance as well as temperature and UV resistance. Surface texture – subtly textured, visually based on the original interior. 3D printing made in Germany – manufactured additively with 0.2 mm layer height. Easy installation – replacement possible without modification work. Suitable for & reference part numbers The following part numbers are provided solely as a non-binding reference for identifying suitable vehicle variants: Position Reference part number Installation location Left 7D0 858 197 B-pillar, seat belt guide Right 7D0 858 198 B-pillar, seat belt guide Installation notes Carefully remove the old cover. Ensure that the seat belt guide moves freely. Position the new trim cap and press in evenly. Pull the belt out and retract it several times to check correct seating.

Technical and functional features OE reference number left (for comparison only): 705 829 725A OE reference number right (for comparison only): 705 829 726A Application: cover for the lower tailgate guide – suitable for VW T4 Material & manufacturing: high-quality plastic, precise reproduction using SLA on a Formlabs Form 4; colour: black / satin black Fit: dimensionally accurate reconstruction based on original samples Availability: original parts are hardly available – this reproduction closes the supply gap Development: reconstruction based on original samples from the community Why this part is useful The covers for the left and right tailgate guides perform an important function for clean tailgate guidance and help protect the lower area from dirt and moisture. Many vehicles are missing these caps or they are damaged, which can lead to unattractive openings and, over time, to corrosion problems. These accurate-fit reproductions restore the original look and function and are ideal for restorations, camper conversions and the long-term preservation of your VW T4.

Sliding door stay | stopper – suitable for VW T4 Do you know the problem that your T4 sliding door keeps closing by itself? Especially when the door should remain only partially open, a reliable stop is often missing. This sliding door stay, suitable for the VW T4, allows the sliding door to be fixed in the desired position. The stopper is inserted into the upper guide rail and locked via a lever mechanism. This keeps the door where you need it – without unintended closing. Advantages of the sliding door stay: Flexible positioning: Fix the sliding door at different opening positions Easy handling: Installation by inserting into the upper guide rail More everyday comfort: No unwanted slamming or closing of the door Practical in use: Suitable for camping, leisure and work vehicles

This plastic insert (stop) is installed in the pendulum support. It can help relieve the pendulum support mount during operation and is generally always fitted on the VW T4 Syncro. Version: reproduction, manufactured using SLA. Suitable for gearbox codes: EEZ, DQR, 02G Syncro OE part numbers (for comparison purposes only): 7D0 399 207E, 7D0 323 609 Scope of delivery: 2 pieces

Kappe, Deckel, Dämpfer mit Dichtung für Pilzkopfschraube.

This accurate-fit sliding door stop is a high-quality reproduction for the B-pillar and serves as a replacement for a damaged or missing part – suitable for VW T4 from 1995. The precisely 3D-printed stop integrates cleanly into the body structure and restores controlled, damped contact of the sliding door.OEM reference number (for comparison purposes only):701843673AWhy this sliding door stop? An intact sliding door stop helps protect the body from damage and ensures clean closing and stopping behaviour of the door. With this accurate-fit reproduction, you can reliably restore the function and appearance of your vehicle.

This accurate-fit sliding door stop is a high-quality reproduction for the B-pillar and serves as a replacement for a damaged or missing part – suitable for VW T4 up to 1995. The precisely 3D-printed stop integrates cleanly into the body structure and restores controlled, damped contact of the sliding door.OEM reference number (for comparison purposes only):701843673AWhy this sliding door stop? An intact sliding door stop helps protect the body from damage and ensures clean closing and stopping behaviour of the door. With this accurate-fit reproduction, you can reliably restore the function and appearance of your vehicle.

Specially shaped end cap for the sliding door rail, designed for installation on a sliding door wedge. Suitable for sliding door wedges with 20 mm and 45 mm door lift.

End cap for the sliding door rail, suitable for VW T4. Reproduction version for covering the end of the rail on the sliding door. OE reference number (for comparison purposes only): 701843884B

Cover plate / trim panel for the dashboard – reproduction, suitable for VW T4. This cover is used to close open cut-outs in the VW T4 dashboard. It is manufactured as a reproduction and intended for use in the corresponding openings. Details: Suitable for dashboard cut-outs measuring 94 × 66 mm in the VW T4 Manufactured using 3D printing Material: plastic Surface with visible texture Installation by inserting into the intended opening Note: Slight surface textures may be visible due to production. These are typical for 3D printing and do not constitute a defect. Made in Germany – Delta Garage. OE reference number (for comparison purposes only): 701957085

Cover plate / trim panel for the dashboard – reproduction, suitable for VW T4. This cover is used to close open cut-outs in the VW T4 dashboard. It is manufactured as a reproduction and intended for use in the corresponding openings. Details: Suitable for dashboard cut-outs measuring 94 × 66 mm in the VW T4 Manufactured using 3D printing Material: plastic Surface with visible texture Installation by inserting into the intended opening Note: Slight surface textures may be visible due to production. These are typical for 3D printing and do not constitute a defect. Made in Germany – Delta Garage. OE reference number (for comparison purposes only): 701957085

Lautsprecher-Blende für die vorderen Türen, passend für VW T4 1996 - 2003OE-Nummer: 703035793C (nur für Vergleichszwecke)

The stainless steel rail connector is an accessory component of the Offroadgrip system and is used to connect rails or profiles within modular roof rack constructions. It provides ten M8 threaded inserts for fastening. Scope of delivery 1 × stainless steel rail connector (Offroadgrip system)