Offroadgrip roof rack – universal version
| Quantity | Unit price |
|---|---|
| To 2 | €69.99 |
| To 4 | €64.99 -7,14 % |
| To 6 | €59.99 -14,29 % |
| From 7 | €54.99 -21,43 % |
Available, delivery time: 1-3 days
Product information "Offroadgrip roof rack – universal version"
The Offroadgrip roof rack in the universal version is a modular system for mounting accessories on vehicle roofs. This version is intended for use on vehicles with existing airline rails.
The system consists of stainless steel components and is designed for individual configuration within roof rack setups. The specific design, combination of components and assessment of the overall load are the responsibility of the user.
Within the system, different accessory components and adapters can be used. The selection and use of the respective components depend on the vehicle type, installation situation and intended application.
Information on currently available accessories and components under development can be found in the Delta Garage Wiki.
- Modular roof rack system for mounting accessories
- Version for vehicles with existing airline rails
- Use of different adapters and connecting elements possible
- Use of system profiles up to approx. 40 × 40 mm, depending on configuration
- Compensation of installation differences possible within the system geometry
Scope of delivery
- 1 × Offroadgrip roof rack – universal version
- 1 × stainless steel L-bracket with M8 thread (Offroadgrip system)
- 1 × slot clamp with 2 × M8 studs for airline rails (25.4 mm / 1")
- 2 × self-locking flange nuts, M8, A2 stainless steel
- 3 × hex flange bolts with serrated locking flange, M8 × 16, A2 stainless steel
Pre-installed airline rails with the corresponding hole spacing are required for installation.
Customer service
Our ticket system is available for technical questions regarding configuration or use of the system.
| Lochabstand Airlineschiene: | 25,4 mm (1") |
|---|---|
| Passend für Fahrzeugtyp: | VW T5, VW T6 |
| Material: | A2-Edelstahl |
| Farbe: | Schwarz |
| Beschichtung: | Pulverbeschichtet |
Angaben zum Hersteller
Delta Garage UG (haftungsbeschränkt)
Pfaffenhofener Str. 3A
85302 Gerolsbach
Deutschland
Telefon, WhatsApp, Telegram:+49 160 94663915
E-Mail:service@deltagarage.de
Kontaktformular: Zum Kundenservice
Hinweise zur Produktsicherheit
Unsere Kfz-Ersatzteile und Fahrzeugkomponenten werden unter Berücksichtigung der jeweiligen technischen Anforderungen entwickelt und hergestellt.
Die Produkte sind ausschließlich für die in der jeweiligen Produktbeschreibung angegebene Verwendung vorgesehen. Vor dem Einbau sind die Kompatibilität mit dem Fahrzeug sowie der ordnungsgemäße Zustand des Produkts zu prüfen.
Der Einbau muss fachgerecht und unter Beachtung der geltenden technischen Vorschriften erfolgen. Insbesondere bei sicherheitsrelevanten Bauteilen, Karosseriearbeiten und Schweißarbeiten ist entsprechend qualifiziertes Fachpersonal erforderlich.
Für bestimmte Fahrzeugbauteile können zusätzliche Genehmigungs- oder Abnahmepflichten bestehen. Sofern eine ABE, ein Materialgutachten oder andere technische Unterlagen vorhanden sind, müssen deren Geltungsbereich und Auflagen beachtet werden. Ein Materialgutachten stellt keine eigenständige Genehmigung für den Fahrzeugbetrieb dar.
Weitere Sicherheits- und Einbauhinweise:
Allgemeine Produktsicherheitsinformationen gemäß GPSR (EU) 2023/988 anzeigen
Die allgemeinen Sicherheitshinweise ergänzen die jeweiligen Produktinformationen. Produktspezifische Warnhinweise, Montagevorgaben und gesetzliche Anforderungen bleiben maßgeblich.
Login
Passendes Zubehör
The repair panel set for the rear suspension mount is manufactured as a reproduction and is suitable for vehicles such as the VW T4. It is intended for repair and reconditioning work in the area of the rear axle and suspension mounting points. Note: Vehicle and model designations are provided solely to identify the suitable area of application. This is a reproduction and not an original part.
Available, delivery time: 1-3 days
The M6 mounting bracket is an accessory component of the Offroadgrip system and is used for mounting airline rails, keder rails as well as other accessories on the roof rack. It is inserted into the corresponding receptacle of the Offroadgrip system, while the accessory is screwed on from the outside. Scope of delivery 5 × M6 mounting bracket (Offroadgrip system) Note: Screws are not included in the scope of delivery.
Available, delivery time: 1-3 days
The stainless steel outrigger is an accessory component of the Offroadgrip system and is used to extend the mounting point for awnings or other accessories. It is suitable for use on vehicles such as VW T4, VW T5 and VW T6 in combination with the Offroadgrip system or compatible airline rails. The outrigger shifts the mounting point outwards by approx. 82 mm. The integrated elongated slot with a length of approx. 65 mm allows flexible compensation of height differences and adjustment to different mounting points. Note: The possible load capacity of the structure depends on the respective mounting method, the number of outriggers used, the mounted accessories and the overall construction and must be assessed by the user at their own responsibility. Scope of delivery 1 × stainless steel outrigger (Offroadgrip system) 1 × M8 mounting bracket (Offroadgrip system) 3 × hex bolts with flange and serration, M8 × 16, A2 stainless steel
Available, delivery time: 1-3 days
The M8 mounting bracket is an accessory component of the Offroadgrip system and is used for external fastening of accessories on the roof rack. It is placed into the corresponding receptacle of the Offroadgrip system, while the accessory is fastened from the outside. Scope of delivery 3 × M8 mounting bracket (Offroadgrip system) Note: Screws are not included in the scope of delivery.
Available, delivery time: 1-3 days
The stainless steel L-bracket with three pressed-in M8 threads is an accessory component of the Offroadgrip system and serves as a connecting element for modular structures on roof racks of transporters, vans or motorhomes. It enables various configurations for mounting and connecting structures and accessories. With this L-bracket, the following applications can be realised, among others: Mounting solar panels Mounting 40 mm Bosch system profiles Mounting 30 mm Bosch system profiles Connection point for two 40 mm Bosch system profiles for longitudinal bracing Connection point for two 30 mm Bosch system profiles for longitudinal bracing T-connection of two 40 mm Bosch system profiles with a departing profile for a cross brace T-connection of two 30 mm Bosch system profiles with a departing profile for a cross brace Mounting wooden slats Mounting wooden floors or multiplex panels Mounting pipes up to a diameter of approx. 40 mm The L-bracket can be mounted on the upper or the lower level of the Offroadgrip system. When mounted on the lower level, the screw connection is, by design, less easily accessible on the inside. Note: The possible load capacity of the structure depends on the respective mounting method, the accessories used and the overall construction and must be assessed by the user accordingly. Scope of delivery 1 × stainless steel L-bracket with 3 × M8 thread (Offroadgrip system) 3 × hex bolts with flange and serration, M8 × 16, A2 stainless steel
Available, delivery time: 1-3 days
Offroadgrip User Manual
Technical Drawings
Offroadgrip Extensions