Zubehör für Alltag, Camping & Offroad – passend für VW T4

More clearance for wider tyres: This sliding door wedge enables raising the door by 45 mm and is suitable for VW T4. Raising the sliding door prevents it from hitting the wheel arch on vehicles with wider tyres. This can help avoid damage to the door, interior trim and bodywork, and the sliding door can run smoothly again. Design & construction The sliding door wedge consists of three interlocking elements that are slid together before installation. This design provides high stability and even load distribution. The holes and dimensions are based on the standard mounting points, so no rework is required. Details: Suitable for vehicles suitable for VW T4 Door lift: approx. 45 mm Material: robust, mechanically load-bearing plastic 3-part design for high stability Mounting points and dimensions based on the series version Installation note: The three elements are slid together before installation and then form a fixed unit. Installation is carried out at the existing mounting points of the sliding door bracket and can be done with standard tools.

More clearance for wider tyres: After more than 10 weeks of development time, field tests and production adjustments, this sliding door wedge with 20 mm door lift is available – suitable for the VW T4. The wedge raises the sliding door sufficiently so that on vehicles with wider tyres it no longer makes contact. This can help avoid damage to the door, interior trim or wheel arch. OE reference number (for comparison purposes only): 104-11-280-15 Why this sliding door wedge? The reproduction consists of three interlocking elements that are slid together before installation. This design provides high stability and a reproducible fit. The holes are based on the series part, so rework is generally not required. Details: Suitable for VW T4 (all body variants) Door lift: approx. 20 mm Material: mechanically load-bearing plastic 3-part construction for stable connection Dimensions and hole pattern based on the series part Development and field testing at Deltagarage Installation note: The three elements are slid together before installation and then form a fixed unit. The fastening is carried out at the existing sliding door bracket. Installation is possible with standard tools. Scope of delivery: 1 × sliding door wedge with approx. 20 mm door lift 1 × cover cap for the sliding door rail Not included in scope of delivery: For installation, 3 × M6 standoffs are required. The required length must be determined depending on the vehicle.

The dashboard tray 2.0 Gen. 2 – variant A is a 3D‑printed in‑house development and is manufactured individually. Processing time may therefore take 3–5 working days. The stated availability is not a binding delivery time. Compatibility note: This dashboard tray is only suitable for vehicles with a soft, rounded dashboard. Not suitable for hard or angular dashboards. View version for hard dashboard Dashboard tray 2.0 Gen. 2 – variant A The tray is intended for use on the dashboard and features several open storage areas. It is intended for structured storage of items while driving or when stationary. Storage areas The design includes, among other things, two round holders as well as additional open compartments. The dimensions of the round holders are approx. 81 mm at the bottom and approx. 87 mm at the top. Further compartments are intended for smaller items. Optional use of accessories Additional components can be attached to the dashboard tray if they are suitable by design. Selection and use of accessories is at the user's own responsibility. Note on temperature exposure At high temperatures, especially in closed, unventilated vehicles, material-related deformation may occur if additional weight is attached. In such cases, it is recommended to remove optional accessories before leaving the vehicle. Mounting The tray is intended for installation on the dashboard and is fixed using double-sided adhesive tape. A rear support surface is provided by design. DIY note For users with their own 3D printer, further information on supplementary projects is available in the Delta Garage Wiki: https://wiki.deltagarage.de/doku.php?id=armaturenbrettablage:zubehoer-download Made in Germany – Deltagarage

As each tray is manufactured individually (3D printed), processing the order may take 3–5 days. The stated availability is a non-binding guideline. ATTENTION: This dashboard tray 2.0 generation 2 is only suitable for the hard and straight dashboard of the VW T4. You can find the version for the soft and rounded dashboard here. Dashboard tray 2.0 B | organiser | cup holder – suitable for VW T4 This dashboard tray 2.0 B is an in-house developed accessory solution for the hard dashboard of the VW T4. It is adapted to the contours of the dashboard and offers several separate storage areas. Storage options The tray has two cup holders designed for standard cups, bottles and cans with a lower diameter of 81 mm and an upper diameter of 87 mm. Further compartments are intended for smaller items such as tissues, sunglasses or pens. In addition, holders for shopping trolley coins are integrated. Optional accessory mount Optional accessories such as smartphone or tablet holders or other compatible attachments can be mounted on the dashboard tray. Use is at the user's own responsibility. Note At high temperatures and strong sunlight, material changes may occur in a closed and unventilated vehicle, especially with additional load from attached accessories. It is recommended to remove accessories when the vehicle is parked. Mounting The dashboard tray is installed using double-sided adhesive tape and is additionally positioned by a rear locating edge. The fit is based on a 3D scan of the corresponding VW T4 dashboard. DIY option Users with their own 3D printer can download the accessory project. Further information can be found in the Delta Garage Wiki. The dashboard tray 2.0 is a functional accessory for the VW T4 and enables structured use of the available dashboard area.

If you want to improve the sound in your vehicle in a targeted way, these speaker adapters for the dashboard offer a practical solution. By aiming the speakers towards the passenger compartment, playback of midrange and treble in particular can be improved. The speaker adapters are manufactured unfinished and are made of black polycarbonate plastic. Speaker adapters for the dashboard – painting The adapters can be painted. Solvent-based paints or acetone should be avoided, as these can attack the polycarbonate. Use of acrylic paints is recommended. For an even surface finish, pre-treatment with filler is recommended. Speaker adapters for the dashboard – wrapping Alternatively, the adapters can be wrapped with different materials. Depending on the desired look, e.g. textiles or synthetic leather are possible. Technical information: Maximum diameter of the speaker mount: approx. 104 mm Diameter of the pass-through: approx. 94 mm Tested with speaker: Ground Zero GZTF 4.0X, 100 mm, 2-way coax Scope of delivery: 1 × speaker adapter 100 mm, left 1 × speaker adapter 100 mm, right Please note: 1. The speaker adapters are available in two versions – suitable for soft or hard dashboard. Please select the correct variant. 2. No speakers are included. Installation: The adapters are fastened from below through the existing openings in the dashboard: – soft dashboard: 2 × M4 screws – hard dashboard: 4 × M4 screws (Screws not included) Installation guide: A detailed guide is available in the Delta Garage Wiki.

The Offroadgrip roof rack is a universal, modular kit-based mounting system for securely mounting loads and accessories on the vehicle roof. This version is suitable for VW T4 vehicles and is particularly suitable for off-road, campervan and motorhome applications. Made from high-quality stainless steel, the system enables flexible and stable mounting of a wide variety of setups. With specially developed Offroadgrip adapters, it is possible to mount, among other things, solar panels, work and exterior lights, awnings, roof tents, tarpaulins or sun sails – without compromising safety or load capacity. Thanks to the standardised Offroadgrip modular system, aluminium system profiles up to 40 × 40 mm can also be connected directly or indirectly and supported. This allows complex roof constructions and bracing to be realised. The Offroadgrip system is continuously being developed further. Information on current and planned adapters can be found in the Delta Garage Wiki . Advantages of the Offroadgrip roof rack Universal mounting system for loads and accessories on vehicle roofs Compensation of the roof slope in longitudinal direction (approx. 3–4°) possible Stainless steel adapters for off-road, camping and outdoor accessories Suitable for airline rails with 25.4 mm (1") hole spacing Modular system for camper, off-road and motorhome applications Predefined holes for easy and repeatable accessory installation Up to three additional airline rails mountable without drilling Special version suitable for VW T4 with slightly curved roof Robust, durable stainless steel construction, optionally powder-coated Suitable for solar panels, lights, awnings, roof tents, tarpaulins, sun sails etc. Direct or indirect mounting of aluminium system profiles up to 40 × 40 mm Scope of delivery 1 × Offroadgrip roof rack, suitable for VW T4 1 × Offroadgrip stainless steel L-bracket with M8 thread 1 × Offroadgrip slot bridge with 2 × M8 studs for airline rail (25.4 mm) 2 × self-locking flange nuts M8, A2 stainless steel 3 × hex bolts M8 × 16 with flange, A2 stainless steel Requirement: Airline rails with 25.4 mm (1") or 25 mm hole spacing must already be installed on the vehicle. Customer service We will be happy to support you with questions about selection, expansion or installation of the Offroadgrip system. Please use our Ticket system .

Sliding door stay | stopper – suitable for VW T4 Do you know the problem that your T4 sliding door keeps closing by itself? Especially when the door should remain only partially open, a reliable stop is often missing. This sliding door stay, suitable for the VW T4, allows the sliding door to be fixed in the desired position. The stopper is inserted into the upper guide rail and locked via a lever mechanism. This keeps the door where you need it – without unintended closing. Advantages of the sliding door stay: Flexible positioning: Fix the sliding door at different opening positions Easy handling: Installation by inserting into the upper guide rail More everyday comfort: No unwanted slamming or closing of the door Practical in use: Suitable for camping, leisure and work vehicles

The stainless steel T-connector is an accessory component of the Offroadgrip system and is used to create T-shaped connections in modular constructions on roof racks of transporters, vans or motorhomes. It enables the connection of profiles and accessories via M8 threaded points. Scope of delivery 1 × stainless steel T-connector (Offroadgrip system)

The Deltaloop is a mounting solution for attaching accessories in the interior, suitable for VW T4. It is inserted into existing cut-outs of the roof inner longitudinal member and can be installed without additional tools. The Deltaloop is made of PC plastic and features a stainless-steel eyelet. It is intended for holding and fastening light items such as nets, bags or similar accessories. The openings for applying cavity protection remain accessible, so such maintenance work can still be carried out. The Deltaloop is designed as an interior accessory solution for the VW T4.

The Deltaloop is a mounting solution for attaching accessories in the interior, suitable for VW T4. It is inserted into existing cut-outs of the roof inner longitudinal member and can be installed without additional tools. The Deltaloop is made of PC plastic and features a stainless-steel eyelet. It is intended for holding and fastening light items such as nets, bags or similar accessories. The openings for applying cavity protection remain accessible, so such maintenance work can still be carried out. The Deltaloop is designed as an interior accessory solution for the VW T4.

The stainless steel rail connector is an accessory component of the Offroadgrip system and is used to connect rails or profiles within modular roof rack constructions. It provides four M8 threaded inserts for fastening. Scope of delivery 1 × stainless steel rail connector (Offroadgrip system)

Abgaskamindeckel passend für Truma Heizung im VW T4 California – PETG Nachbau in Weiß Dieser Deckel ist ein passgenauer Nachbau für die Außenabdeckung des Abgaskamins einer Truma Heizung, wie sie unter anderem im VW T4 California verbaut sein kann. Der Kamindeckel ersetzt eine fehlende, beschädigte oder gealterte Abdeckung am äußeren Kaminbereich und sorgt wieder für einen sauberen, geschützten Abschluss an der Fahrzeugaußenseite. Gerade bei älteren VW T4 California ist der originale Deckel häufig spröde, vergilbt, gebrochen oder nicht mehr vollständig vorhanden. Ohne passende Abdeckung ist der Kaminbereich stärker Witterung, Schmutz, Laub, Insekten und mechanischen Einflüssen ausgesetzt. Da der Abgaskamin zur Verbrennungsluft- und Abgasführung der Heizung gehört, sollte dieser Bereich sauber, frei und vollständig erhalten bleiben. Der Deckel wird aus weißem PETG gefertigt und ist als funktionaler Ersatz für den vorhandenen Kamindeckel gedacht. Die helle Farbe passt optisch gut zu vielen originalen Außenbauteilen am VW T4 California. Vorteile des Kamindeckels Nachbau der Außenabdeckung bzw. des Kamindeckels Passend für Truma Heizungen im VW T4 California, sofern Bauform und Kamin übereinstimmen Ersatz bei fehlendem, beschädigtem oder sprödem Originaldeckel Schützt den Kaminbereich bei Nichtbetrieb vor Schmutz, Witterung und Fremdkörpern Gefertigt aus weißem PETG Saubere und dezente Optik am Fahrzeug Ideal für Erhalt, Reparatur und Pflege älterer VW T4 California Camper Warum ist der Abgaskamindeckel wichtig? Der Abgaskamin ist ein außenliegender Bestandteil der Heizungsanlage. Über diesen Bereich werden je nach Heizungsmodell Verbrennungsluft und Abgase geführt. Deshalb sollte der Kaminbereich nicht beschädigt, zugesetzt oder dauerhaft offen der Witterung ausgesetzt sein. Ein fehlender oder defekter Deckel kann dazu führen, dass sich Schmutz, Laub, Insekten oder Feuchtigkeit im Kaminbereich sammelt. Besonders bei längeren Standzeiten, Winterbetrieb oder saisonaler Nutzung des Campers ist eine passende Abdeckung sinnvoll, um den Außenbereich der Heizungsanlage zu schützen. Wichtig: Bitte beachte immer die Bedienungsanleitung deiner konkreten Truma Heizung. Je nach Heizungs- und Kaminmodell muss eine vorhandene Abdeckung vor dem Betrieb der Heizung entfernt werden. Der Kamin darf im Betrieb nicht blockiert sein. Material Der Deckel besteht aus weißem PETG. PETG ist ein zäher, formstabiler Kunststoff und eignet sich gut für funktionale Ersatzteile im Außenbereich. Wie bei allen Kunststoffteilen kann es durch dauerhafte UV- und Witterungseinwirkung langfristig zu optischen Veränderungen kommen. Lieferumfang 1x Kamindeckel / Abgaskamindeckel als Nachbau aus weißem PETG Hinweis zur Kompatibilität Bitte vor dem Kauf die Bauform deines vorhandenen Kamins mit den Produktbildern vergleichen. Bei älteren Fahrzeugen können je nach Baujahr, Heizungsmodell und Vorbesitzer-Umbauten unterschiedliche Kaminvarianten verbaut sein. Selber drucken oder fertig kaufen? Wer einen eigenen 3D-Drucker besitzt, kann dieses Projekt auch als kostenlosen Download über unseren Blog erhalten und den Kamindeckel selbst drucken. Dennoch freuen wir uns natürlich, wenn Du das fertige Produkt direkt bei uns kaufst. Mit jedem Kauf unterstützt Du die weitere Entwicklung neuer Rekonstruktionen und Ersatzteile für die VW T4 Community. Viele kleine Kunststoffteile sind original nicht mehr oder nur noch schwer erhältlich – genau hier setzen wir mit eigenen Nachkonstruktionen an. Der Preis für das fertig gedruckte Teil ist bewusst fair kalkuliert und berücksichtigt nicht nur Material und Druckzeit, sondern auch Konstruktion, Tests, Pflege der Daten, Verpackung und Versand. Dein Kauf hilft dabei, dass weitere praktische Lösungen für den Erhalt des VW T4 entstehen können. Gratis Download für Selbstdrucker: Kamindeckel passend für Truma Heizung im VW T4 California kostenlos herunterladen Rechtlicher Hinweis Dies ist kein Originalteil von Truma oder Volkswagen, sondern ein Nachbau aus eigener Fertigung. Die Bezeichnungen Truma, VW und VW T4 California werden ausschließlich zur Beschreibung der Kompatibilität verwendet.