Dashboard tray 2.0 Gen. 2 – variant B | organiser | cup holder, suitable for VW T4
Product information "Dashboard tray 2.0 Gen. 2 – variant B | organiser | cup holder, suitable for VW T4"
As each tray is manufactured individually (3D printed), processing the order may take 3–5 days. The stated availability is a non-binding guideline.
ATTENTION:
This dashboard tray 2.0 generation 2 is only suitable for the hard and straight dashboard of the VW T4.
You can find the version for the soft and rounded dashboard here.
Dashboard tray 2.0 B | organiser | cup holder – suitable for VW T4
This dashboard tray 2.0 B is an in-house developed accessory solution for the hard dashboard of the VW T4. It is adapted to the contours of the dashboard and offers several separate storage areas.
Storage options
The tray has two cup holders designed for standard cups, bottles and cans with a lower diameter of 81 mm and an upper diameter of 87 mm. Further compartments are intended for smaller items such as tissues, sunglasses or pens. In addition, holders for shopping trolley coins are integrated.
Optional accessory mount
Optional accessories such as smartphone or tablet holders or other compatible attachments can be mounted on the dashboard tray. Use is at the user's own responsibility.
Note
At high temperatures and strong sunlight, material changes may occur in a closed and unventilated vehicle, especially with additional load from attached accessories. It is recommended to remove accessories when the vehicle is parked.
Mounting
The dashboard tray is installed using double-sided adhesive tape and is additionally positioned by a rear locating edge. The fit is based on a 3D scan of the corresponding VW T4 dashboard.
DIY option
Users with their own 3D printer can download the accessory project. Further information can be found in the Delta Garage Wiki.
The dashboard tray 2.0 is a functional accessory for the VW T4 and enables structured use of the available dashboard area.
| Armaturenbrett Version: | Hartes Armaturenbrett |
|---|---|
| Schichthöhe: | Standard 0,2 mm |
| Material: | GreenTec Pro - Kunststoff |
| Farbe: | Schwarz, Silbergrau |
Angaben zum Hersteller
Delta Garage UG (haftungsbeschränkt)
Pfaffenhofener Str. 3A
85302 Gerolsbach
Deutschland
Telefon, WhatsApp, Telegram: 0160 94663915
E-Mail: service@deltagarage.de
Kontaktformular: ticket.deltagarage.de
Hinweise zur Produktsicherheit
Unsere Reparaturbleche und Kunststoffteile für den KFZ-Bereich – werden unter höchsten Qualitätsansprüchen gefertigt:
- Die Reparaturbleche entstehen in Zusammenarbeit mit spezialisierten Fachbetrieben, die in unserem Auftrag nach unseren Konstruktionsvorgaben produzieren.
GPSR-Informationen zu Reparaturblechen anzeigen
- Die Kunststoffteile werden direkt bei uns im Haus im 3D-Druckverfahren hergestellt und unterliegen strengen internen Prüfprozessen.
GPSR-Informationen zu Kunststoffteilen anzeigen
Beim Auswechseln und Einbau von Ersatzteilen müssen die vom Hersteller vorgegebenen technischen Daten eingehalten werden. Es wird ausdrücklich empfohlen, den Einbau durch qualifiziertes Fachpersonal vornehmen zu lassen. Dies gilt auch für Ersatzteile, deren Einbau nur wenige Handgriffe benötigt. Produkte werden in der Regel ohne Montageanleitung geliefert.
Login
1 review
15 September 2024 14:15
Super Qualität
Habe die Ablage vor 1 Monaten gekauft, den Sommer hat sie unbeschadet überstanden. Anfangs dachte ich das der 3d druck nicht haltbar ist, wurde aber von der Qualität und Verarbeitung schnell überzeugt. Vor allem gefällt mir die Option der Nutzung von Tassen mit Henkel, endlich können wir unsere Lieblingstassen mitnehmen und während der Fahrt den Kaffee genießen. Alles im allem ein fantastisches Produkt. Ein Verbesserungsvorschlag hätten wir, Antirutschmatten in den Fächern würden die Ablage wirklich perfekt machen.
Suitable for the Hard Dashboard
This storage tray is designed for hard dashboards. Here’s how you can check if your dashboard is suitable:
1. Your dashboard is flat, as shown in the image.
2. The material of the dashboard is hard; you cannot press the corners in with your thumb.
3. Your VW T4 was built before November 1995 and does not have airbags.
You can find the version for the soft dashboard here.
The Color Variants
The Dashboard Storage 2.0 is available in two elegant color options: Anthracite and Black. Each variant features a matte surface that is not only pleasant to the touch but also refined with a fine, subtle line print pattern. This detail, a result of the manufacturing process, enhances the design and gives each piece a unique character.
Perfectly Shaped
The VW T4 organizer seamlessly adapts to the lines of the dashboard, creating a cohesive and aesthetically pleasing overall impression. This precise fit to the dashboard's contour not only enhances the visual harmony but also provides additional storage space inside the organizer.
Accessories Available Under the CC License 4.0
Owners of a 3D printer have the opportunity to produce all accessory extensions themselves. The corresponding models are available for free download in the Delta Garage Wiki. Additionally, some members of the T4 community create their own adapters, which they also make available. For those without access to a 3D printer, the accessories are, of course, available for purchase in our shop.
Unsere Kunden kauften zusätzlich
VenturaFlex – Ventilation and power module VenturaFlex is a ventilation and power module implemented as a patented system solution and intended for vehicles such as the VW T4. The module is inserted into the guide of the sliding window (driver’s side) and positioned there. Installation is carried out without any modification to the bodywork. The sliding window remains in place, and drilling or permanent modifications to the vehicle are not intended. VenturaFlex combines several functions within a modular design. These include a ventilation opening as well as connections for an external power supply and optional consumers. System features Patented system solution Installation via the sliding window guide (driver’s side) No bodywork modifications intended Designed as a temporarily installable module Electrical connections The system features a CEE inlet for external power sources as well as an additional connection for optional consumers, such as solar panels or external devices. An integrated RCD module is part of the system. It is designed as a component for residual current detection. Ventilation function VenturaFlex enables air exchange via the sliding window. An integrated insect screen is part of the module. The ventilation opening is designed so that precipitation does not enter the interior directly. Design Material and system design intended for vehicle use Modular construction Designed for temporary use A detailed description of use and intended operation is included in the user manual: https://wiki.deltagarage.de/doku.php?id=vwt4schiebefenster:gebrauchsanleitung ⚠ Important safety notice regarding the use of the VenturaFlex system The VenturaFlex system is a mobile adapter for temporary power supply via a CEE camping socket with integrated residual current device (RCD). It does not replace a permanently installed shore power connection in accordance with DIN VDE 0100-721. For permanent use, an electrically conductive connection of the protective conductor (PE) to the vehicle body is required. This connection may only be established by a qualified electrician. ❗ Warning: Improper use may result in electric shock or property damage. The applicable standards and regulations for electrical installations in leisure vehicles must be observed (e.g. DIN VDE 0100-721, DIN VDE 0100-708).
Available, delivery time: 1-3 days
Ventilation grille for the sliding window: This ventilation grille is intended for use in the right-hand sliding window and is used for air exchange inside the vehicle. The ventilation grille is inserted into the window frame with the window open. It is intended exclusively for original windows with a 50/50 split of the sliding window. When the ventilation grille is inserted, the sliding window cannot be closed. Design of the reproduction The reproduction ventilation grille is made of aluminium and is coated black. It is designed as a replacement/accessory part for the relevant vehicle application. A metal mesh is integrated into the grille. Technical details: Suitable for VW T4 models from 01/1990 to 12/2003 Installation side: right (passenger side) Material: aluminium, black coated Dimensions: wide grille – 38.7 cm Weight: approx. 1.1 kg Installation note: The ventilation grille is inserted into the window frame with the window open and can only be removed from the inside. It is recommended to use the ventilation grille only when the vehicle is stationary and to remove it before driving.
Available, delivery time: 1-3 days
Ventilation grille for the sliding window: This ventilation grille is intended for use in the right-hand sliding window and is used for air exchange inside the vehicle. The ventilation grille is inserted into the window frame with the window open. It is intended exclusively for original windows with a 50/50 split of the sliding window. When the ventilation grille is inserted, the sliding window cannot be closed. Design of the reproduction The reproduction ventilation grille is made of aluminium and is coated black. It is designed as a replacement/accessory part for the relevant vehicle application. A metal mesh is integrated into the grille. Technical details: Suitable for VW T4 models from 01/1990 to 12/2003 Installation side: right (passenger side) Material: aluminium, black coated Dimensions: wide grille – 38.7 cm Weight: approx. 1.1 kg Installation note: The ventilation grille is inserted into the window frame with the window open and can only be removed from the inside. It is recommended to use the ventilation grille only when the vehicle is stationary and to remove it before driving.
Available, delivery time: 1-3 days
3D Printing
Material Structure:
Due to the layer-by-layer process of 3D printing, fine lines or textures may be visible on the product's surface. These characteristics are typical of 3D printing and do not affect the functionality or durability of your product.
Individual Manufacturing:
Each product is individually manufactured, which may result in slight variations in color, texture, and dimensions. These differences give your product its unique character.
Adapter for mounting acoustic warning systems (e.g. OOONO 2), suitable for all VW T4 dashboard trays 2.0 (variant A & B). In addition, the adapter can also be used on the sun visor of the VW T4. This product is an in-house development by Delta Garage and serves exclusively as a mechanical mount. No warning system or electronics are included. Users who own a 3D printer can find the complete project as a free download in the Delta Garage Wiki . Trademark notice: OOONO is a registered trademark of OOONO A/S. The name is used solely to describe compatibility.
Available, delivery time: 1-3 days
The ball mount adapter with a diameter of 17.15 mm is intended as an accessory for the dashboard tray 2.0. It is suitable for dashboard trays from generation 2 (status: from August 2025). The adapter is used to mount smartphone holders with a ball socket of the corresponding size. Use requires the relevant holder to be suitable by design. Note This item consists of the ball mount adapter only. Additional holders or devices are not included in the scope of delivery. DIY note For users with their own 3D printer, the project is available as a download in the Delta Garage Wiki: https://wiki.deltagarage.de/doku.php?id=armaturenbrettablagezubehuer:kugelkopf_adapter_1715
Available in 5 days, delivery time 1-3 days
Mini vase as an accessory for the dashboard tray 2.0. The vase is intended to hold liquids and is designed as a closed component. Users who own a 3D printer can find the project as a download in the Delta Garage Wiki.
Available, delivery time: 1-3 days
This mount is intended as an accessory for the dashboard tray 2.0 and is used to hold magnetic smartphone chargers. The holder is designed in such a way that magnetic charging units (e.g. MagSafe-compatible chargers) can be mounted. Note: This item consists of the mount only. A charger or smartphone is not included in the scope of delivery. The terms “MagSafe” as well as “Apple” and “iPhone” are registered trademarks of their respective owners and are used solely to describe compatibility. DIY note For users with their own 3D printer, the project is available as a download in the Delta Garage Wiki: https://wiki.deltagarage.de/doku.php?id=armaturenbrettablagezubehuer:apple_magsafe_ladegeraet
Available, delivery time: 1-3 days