Ersatzteile als Nachbau – passend für VW T4

The rear axle mount for the trailing arm (left) is manufactured as a reproduction and is suitable for vehicles such as the VW T4. It is intended for repair and reconditioning work in the rear axle area. Note: Vehicle and model designations are provided solely to identify the suitable area of application. This is a reproduction and not an original part.

The stainless steel rail connector is an accessory component of the Offroadgrip system and is used to connect rails or profiles within modular roof rack constructions. It provides nine M8 threaded inserts for fastening. Scope of delivery 1 × stainless steel rail connector (Offroadgrip system)

The cross connector repair kit for the Westfalia pop-top roof, suitable for the VW T4, is a central component for proper function of the pop-top roof mechanism. Over time, many vehicles develop deformation within the mechanism, which can impair closing of the pop-top roof. This can, among other things, lead to increased wind noise and, in unfavourable cases, negatively affect sealing. The stainless-steel cross connector offered here was developed as a reproduction to increase stiffness of the mechanism and at the same time avoid corrosion over the long term. This makes the part suitable for repair and long-term stabilisation of the pop-top roof system.

This base bracket is manufactured as a reproduction and serves as a holder for resistors in the area of the air-conditioning mounting. It is suitable for vehicles such as the VW T4 and is intended for repair and reconditioning work. The base bracket acts as a base carrier for holding resistors and is part of the corresponding bracket structure. As part of bodywork or reconditioning work, replacement may be necessary if the existing bracket is affected by corrosion or mechanically damaged. Design of the reproduction The reproduction base bracket is made of A2 stainless steel and is designed for use as a durable alternative to worn brackets. It is suitable for vehicles with short and long front ends. Technical details Suitable for vehicles such as the VW T4 (model years 01/1990 to 12/2003) Front-end version: short and long front end Material: A2 stainless steel Coating: none Weight: approx. 0.3 kg OE reference number (for comparison purposes only): 701 971 804 E Note: The reference number is provided solely to identify the suitable area of application. This is a reproduction and not an original part. Installation note Installation is carried out at the intended position as part of the respective repair or reconditioning work. Proper fastening is the responsibility of the person carrying out the work. Manufactured in Germany – Delta Garage.

Important notes 1. Please make sure to watch the product video before purchasing. You can find it directly under “Video” or via this link. 2. The nozzles are supplied without an overpressure valve. If the washer fluid reservoir is filled to the brim, excess water may leak out through the nozzles. If you want to avoid this, you can retrofit a separately available overpressure valve. Why these nozzles matter Vehicles with xenon or gas-discharge headlights pass the periodic inspection under § 50 para. 10 StVZO only with a functional headlight washer system. Missing or non-functioning nozzles can lead to refusal of the inspection sticker. Your benefits at a glance Feature Benefit Optimised fan spray pattern Even wetting without readjustment Plug & play Fit, connect hose – ready to use SLA manufacturing High dimensional accuracy & clean surface Set for left & right Immediate complete replacement of both sides Detailed description These headlight washer nozzles were designed as suitable reproductions for the VW T4. The outer geometry and connection dimensions are based on the series parts, but the outlet channels have been flow-optimised. The result is a stable, even fan spray that reliably wets the headlight surface – without time-consuming adjustment. Compatibility Suitable for VW T4 / EuroVan Short and long front end Model years 1990–2003 Vehicles with factory or OEM-like headlight washer system Suitable replacement for: 701 955 101 – left, unheated 701 955 102 – right, unheated Scope of delivery 2 × headlight washer nozzles (left & right, unheated1) Installation notes: Deltabus blog 1 Existing heater wiring can continue to be used or disconnected. Installation – in under 10 minutes Extend the telescopic cylinders and pull off the old nozzles. Fit the new nozzles until they click audibly into place. Connect the water hose and perform a function test. Note for xenon retrofits For xenon conversions, the washer system must be functional before the periodic inspection. This set provides a practical solution as a suitable replacement for missing or defective nozzles – without expensive new parts. Delta Garage – replacement parts developed in-house, suitable for VW T4.

Your T4, your shifting: This high-quality clevis reproduction provides precise connection between the shift rod and gearbox and restores clean, defined shift feel. In the vehicle, the clevis connects the shift rod to the gearbox and is crucial for exact force transmission when shifting. Due to ageing, material fatigue or corrosion, the original part can wear or be damaged – resulting in imprecise shift travel or reduced shifting function. Why this reproduction? This clevis reproduction is made from robust steel and provides a durable solution for replacing worn or no longer available original parts. The geometry is based on the original dimensions and allows accurate-fit installation. Technical details Suitable for VW T4 vehicles Model years: 11/1995 to 12/2003 Material: steel – robust and durable Reference number (OEM comparison): 701 711 243 B Weight: approx. 0.1 kg Installation note The clevis is installed on the gear linkage and provides the connection to the gearbox. Careful, stress-free installation is required for precise shifting behaviour. Installation should be carried out properly.

This resistor holder is manufactured as a reproduction and is used to hold air-conditioning resistors in the vehicle. It is suitable for vehicles such as the VW T4 and is intended for repair and reconditioning work. The resistor holder acts as a retaining component for fastening resistors and is part of the corresponding bracket structure. As part of reconditioning work, replacement may be necessary if existing brackets are affected by corrosion or mechanically damaged. Design of the reproduction The reproduction resistor holder is made of A2 stainless spring steel and is designed as a durable alternative to worn brackets. It is suitable for vehicles with short and long front ends. Technical details Suitable for vehicles such as the VW T4 (model years 01/1990 to 12/2003) Front-end version: short and long front end Material: A2 stainless spring steel Weight: approx. 0.1 kg OE reference number (for comparison purposes only): 701 971 280 Note: The reference number is provided solely to identify the suitable area of application. This is a reproduction and not an original part. Installation note Installation is carried out at the intended position as part of the respective repair or reconditioning work. Proper fastening is the responsibility of the person carrying out the work.

The sunroof of the VW T4 is an important comfort feature for many drivers – until the small gear in the motor fails. The original part with part number 701959731C can fail after many years, as the plastic loses strength due to ageing, heat and UV exposure. In addition, stiff-running mechanics, e.g. due to dirty or insufficiently lubricated rails, can lead to increased load on the gear. This can result in blocked or jerky sunroof movement. This gear has been reconstructed true to the original and manufactured using industrial SLA on a Formlabs system. A specially selected engineering resin is used, designed for dimensional accuracy, temperature resistance and consistent material properties, and suitable for use in the sunroof motor. Thanks to the precise manufacturing, accurate-fit installation is possible, allowing the gear to be used as a replacement for the original part. To ensure long-term function, the sunroof should be maintained regularly. Clean, well-lubricated guide rails help avoid unnecessary load on the gear. This replacement part is intended to restore sunroof function and is for drivers who value clean fit and reliable mechanics. OE reference number (for comparison purposes only): 701959731C

Repair panel for the rear suspension mount, manufactured as a reproduction for vehicles such as the VW T4. Note: Vehicle and model designations are provided solely to identify the suitable area of application. This is a reproduction and not an original part.

The rear axle mount for the trailing arm (right) is manufactured as a reproduction and is suitable for vehicles such as the VW T4. It is intended for repair and reconditioning work in the rear axle area. Note: Vehicle and model designations are provided solely to identify the suitable area of application. This is a reproduction and not an original part.

This plastic insert (stop) is installed in the pendulum support. It can help relieve the pendulum support mount during operation and is generally always fitted on the VW T4 Syncro. Version: reproduction, manufactured using SLA. Suitable for gearbox codes: EEZ, DQR, 02G Syncro OE part numbers (for comparison purposes only): 7D0 399 207E, 7D0 323 609 Scope of delivery: 2 pieces

Repair panel for the rear suspension mount, manufactured as a reproduction for vehicles such as the VW T4. Note: Vehicle and model designations are provided solely to identify the suitable area of application. This is a reproduction and not an original part.

Lautsprecher-Blende für die vorderen Türen, passend für VW T4 1996 - 2003OE-Nummer: 703035793C (nur für Vergleichszwecke)