Compatible Offroadgrip - Adapters | Mounts | Brackets
Offroadgrip outrigger made of stainless steel for awnings & accessories
The stainless steel outrigger is an accessory component of the Offroadgrip system and is used to extend the mounting point for awnings or other accessories. It is suitable for use on vehicles such as VW T4, VW T5 and VW T6 in combination with the Offroadgrip system or compatible airline rails. The outrigger shifts the mounting point outwards by approx. 82 mm. The integrated elongated slot with a length of approx. 65 mm allows flexible compensation of height differences and adjustment to different mounting points. Note: The possible load capacity of the structure depends on the respective mounting method, the number of outriggers used, the mounted accessories and the overall construction and must be assessed by the user at their own responsibility. Scope of delivery 1 × stainless steel outrigger (Offroadgrip system) 1 × M8 mounting bracket (Offroadgrip system) 3 × hex bolts with flange and serration, M8 × 16, A2 stainless steel
Available, delivery time: 1-3 days
Repair panel set for rear suspension mount – reproduction, suitable for VW T4
The repair panel set for the rear suspension mount is manufactured as a reproduction and is suitable for vehicles such as the VW T4. It is intended for repair and reconditioning work in the area of the rear axle and suspension mounting points. Note: Vehicle and model designations are provided solely to identify the suitable area of application. This is a reproduction and not an original part.
Available, delivery time: 1-3 days
Offroadgrip L-bracket made of stainless steel with M8 thread
The stainless steel L-bracket with three pressed-in M8 threads is an accessory component of the Offroadgrip system and serves as a connecting element for modular structures on roof racks of transporters, vans or motorhomes. It enables various configurations for mounting and connecting structures and accessories. With this L-bracket, the following applications can be realised, among others: Mounting solar panels Mounting 40 mm Bosch system profiles Mounting 30 mm Bosch system profiles Connection point for two 40 mm Bosch system profiles for longitudinal bracing Connection point for two 30 mm Bosch system profiles for longitudinal bracing T-connection of two 40 mm Bosch system profiles with a departing profile for a cross brace T-connection of two 30 mm Bosch system profiles with a departing profile for a cross brace Mounting wooden slats Mounting wooden floors or multiplex panels Mounting pipes up to a diameter of approx. 40 mm The L-bracket can be mounted on the upper or the lower level of the Offroadgrip system. When mounted on the lower level, the screw connection is, by design, less easily accessible on the inside. Note: The possible load capacity of the structure depends on the respective mounting method, the accessories used and the overall construction and must be assessed by the user accordingly. Scope of delivery 1 × stainless steel L-bracket with 3 × M8 thread (Offroadgrip system) 3 × hex bolts with flange and serration, M8 × 16, A2 stainless steel
Available, delivery time: 1-3 days
Offroadgrip slot plate for airline rail – stainless steel, 2× M8 studs
The stainless steel slot plate with two M8 studs is an accessory component of the Offroadgrip system and is used for fastening to airline rails. It enables the Offroadgrip system to be connected to existing airline rail constructions. Note: Please note the hole spacing of the airline rail used when ordering. The distance between the two M8 studs is always 50.8 mm (2 inches). Scope of delivery 1 × stainless steel slot plate with 2 × M8 studs (Offroadgrip system) 2 × self-locking flange nuts with serration, M8, A2 stainless steel
Available, delivery time: 1-3 days
Offroadgrip mounting bracket M8 – set of 3 (without screws)
The M8 mounting bracket is an accessory component of the Offroadgrip system and is used for external fastening of accessories on the roof rack. It is placed into the corresponding receptacle of the Offroadgrip system, while the accessory is fastened from the outside. Scope of delivery 3 × M8 mounting bracket (Offroadgrip system) Note: Screws are not included in the scope of delivery.
Available, delivery time: 1-3 days
Offroadgrip mounting bracket M6 – set of 5 (without screws)
The M6 mounting bracket is an accessory component of the Offroadgrip system and is used for mounting airline rails, keder rails as well as other accessories on the roof rack. It is inserted into the corresponding receptacle of the Offroadgrip system, while the accessory is screwed on from the outside. Scope of delivery 5 × M6 mounting bracket (Offroadgrip system) Note: Screws are not included in the scope of delivery.
Available, delivery time: 1-3 days
Hex bolts with flange and serration, M8×16, A2 stainless steel
Our hex bolts with flange and serration provide a reliable and secure fastening solution for various applications. Made from high-quality A2 stainless steel, they are particularly durable and corrosion-resistant. With a size of M8×16, they are versatile and suitable for a range of industries, including construction, mechanical engineering and electrical engineering. The serration ensures a stable and secure connection and helps prevent unintended loosening. Thanks to the flange, these bolts can provide a larger bearing surface and therefore better load distribution. Order our hex bolts with flange and serration, M8×16, made of A2 stainless steel today and benefit from fast delivery and high quality.
Available in 14 days, delivery time 2-5 days