Cable clamp / cable clip with fixed lid – reproduction, suitable for VW T4

This clip for routing the accelerator or clutch Bowden cable, suitable for VW T4, provides precise and secure fastening at the plastic bulkhead in the engine bay. Missing or damaged clips often lead to the Bowden cable running poorly, which can increase wear and, in unfavourable cases, lead to functional failure. Thanks to its versatile design, the clip is suitable not only for Bowden cables, but also for neat fastening of cables or vacuum hoses in the engine bay. Technical details: Hole diameter for retaining pin: 6.5 mm Clamp inner diameter: 9 mm

No more loose lids, no more lost clips. This 3D-printed cable clamp is designed to suit the VW T4 and can be used as a replacement solution for a fastening part that is no longer available new as an original part. The 50 mm cable clip has been completely redesigned: the lid is permanently connected to the clamp via an integrated hinge. This means it cannot fall off when opened and remains securely in place even on rough roads. Details: Reproduced cable clamp, suitable for VW T4 Permanently integrated lid – no losing it, no rattling Locking via 6.5 mm hole in bodywork or carrier structure Suitable for material thicknesses up to max. 3 mm Material: robust polycarbonate plastic, manufactured using high-quality 3D printing Internal clamping diameter: Ø 50 mm – ideal for thicker cable bundles or wiring looms Why this clamp? Because the original part is no longer available new – and this solution develops the concept further. The permanently attached lid saves time and hassle and prevents losses. Simply insert, clip in, done.

No more loose lids, no more lost clips. This 3D-printed cable clamp is designed to suit the VW T4 and can be used as a replacement solution for a fastening part that is no longer available new as an original part. The 50 mm cable clip has been completely redesigned: the lid is permanently connected to the clamp via an integrated hinge. This means it cannot fall off when opened and remains securely in place even on rough roads. Details: Reproduced cable clamp, suitable for VW T4 Permanently integrated lid – no losing it, no rattling Locking via 6.5 mm hole in bodywork or carrier structure Suitable for material thicknesses up to max. 3 mm Material: robust polycarbonate plastic, manufactured using high-quality 3D printing Internal clamping diameter: Ø 50 mm – ideal for thicker cable bundles or wiring looms Why this clamp? Because the original part is no longer available new – and this solution develops the concept further. The permanently attached lid saves time and hassle and prevents losses. Simply insert, clip in, done.

Is the window regulator no longer running smoothly or does it rattle? A common cause is a small but crucial part: the upper fastening clip for the window regulator guide rail. This clip secures the window regulator guide rail reliably in the door opening. If it is damaged or missing, the window can run crooked or the window regulator mechanism can be subjected to unnecessary load. This accurate-fit reproduction offers a functional solution. Details: Suitable for VW T4 model years 01/1990 to 12/2003 Can be used on driver and passenger side Manufactured using high-quality SLA 3D printing Layer height: approx. 0.10 mm for a smooth, functional surface Why this clip? An intact fastening clip provides stable guidance of the window glass and helps prevent consequential damage to the window regulator mechanism. This replacement part can be used to reliably restore window regulator function. Note: Fine layer lines may be visible due to production. They do not affect fit or function.

This grommet for the step trim serves as a fastening element in the entry area and is suitable for VW T4 vehicles. The precisely manufactured reproduction replaces brittle, damaged or missing original parts and ensures a secure fit of the step trim insert. The part was reconstructed to accurate dimensions based on an available reference sample with a focus on fit and material stability. It is ideal for repair, restoration or factory-style rebuilding of the entry area. Technical features OE reference number (for comparison purposes only): 701 863 787 Application: fastening grommet / clip for step trim in the entry area Vehicle assignment: suitable for VW T4 Manufacturing: precise reproduction with near-original geometry Material: robust plastic, suitable for use in an automotive environment Why this part matters Even small fastening parts perform an essential function in a vehicle. A missing or damaged grommet can cause the step trim not to sit correctly, rattle or come loose. With this accurate-fit reproduction you get a durable and clean solution to restore the entry area functionally and visually – without improvisation. This product is a replacement part developed in-house and not an original part from a vehicle manufacturer. The stated reference number is used solely for comparison purposes.

ABS / brake pad sensor connector holder / clip – suitable for VW T4 Small, but functional: This holder is used to secure the ABS sensor connector and ensures that the plug connection is held correctly and without tension in the intended position. The clip is designed as a replacement for damaged or missing holders and can be used on vehicles that are equipped by design with a corresponding ABS sensor cable. Installation is by simply clipping it in – without rework or special tools. Suitable for: Vehicles suitable for VW T4 with ABS sensor system Installation position: sensor cable in the area of wheel carrier / brake (depending on version) Features: Plastic design with sufficient strength for the intended use Formed to accommodate an ABS sensor connector Suitable as a replacement for broken or missing retaining clips Installation possible without special tools Application note: A correctly secured sensor cable reduces the risk of chafing points, contact issues or malfunctions due to loose plug connections. The clip supports neat, functional routing in the wheel arch area.

Plastic clips for the sliding door trim panel – reproduction, suitable for VW T4 These plastic clips are used to fasten the trim panel to the sliding door of the VW T4. They are manufactured as reproductions and are intended to replace damaged or missing clips. When removing the door trim panel, original clips may be damaged. With these reproduction parts, individual clips can be replaced as needed. Details: Plastic clips for the sliding door trim panel, suitable for VW T4 Manufactured using 3D printing Material: GreenTec Pro Colour: anthracite (dark grey), black Layer height: approx. 0.2 mm Various clip types available (E, M, N, O, P, Q, R, U, V, Y) Application & installation: Damaged clips can be replaced with the reproduction parts: Remove the old clip and clean the surface Bond the new clip in the same position (e.g. using a suitable 2‑component adhesive) Insert the trim panel pin before bonding The clips are used to reattach the door trim panel. Note: Fine layer lines may be visible due to production. These are typical for 3D printing and do not constitute a defect. Made in Germany – Delta Garage.