Aluminium ventilation grille for sliding window, suitable for VW T4

Ventilation grille for the sliding window: This ventilation grille is intended for use in the right-hand sliding window and is used for air exchange inside the vehicle. The ventilation grille is inserted into the window frame with the window open. It is intended exclusively for original windows with a 50/50 split of the sliding window. When the ventilation grille is inserted, the sliding window cannot be closed. Design of the reproduction The reproduction ventilation grille is made of aluminium and is coated black. It is designed as a replacement/accessory part for the relevant vehicle application. A metal mesh is integrated into the grille. Technical details: Suitable for VW T4 models from 01/1990 to 12/2003 Installation side: right (passenger side) Material: aluminium, black coated Dimensions: wide grille – 38.7 cm Weight: approx. 1.1 kg Installation note: The ventilation grille is inserted into the window frame with the window open and can only be removed from the inside. It is recommended to use the ventilation grille only when the vehicle is stationary and to remove it before driving.

VenturaFlex – Ventilation and power module VenturaFlex is a ventilation and power module implemented as a patented system solution and intended for vehicles such as the VW T4. The module is inserted into the guide of the sliding window (driver’s side) and positioned there. Installation is carried out without any modification to the bodywork. The sliding window remains in place, and drilling or permanent modifications to the vehicle are not intended. VenturaFlex combines several functions within a modular design. These include a ventilation opening as well as connections for an external power supply and optional consumers. System features Patented system solution Installation via the sliding window guide (driver’s side) No bodywork modifications intended Designed as a temporarily installable module Electrical connections The system features a CEE inlet for external power sources as well as an additional connection for optional consumers, such as solar panels or external devices. An integrated RCD module is part of the system. It is designed as a component for residual current detection. Ventilation function VenturaFlex enables air exchange via the sliding window. An integrated insect screen is part of the module. The ventilation opening is designed so that precipitation does not enter the interior directly. Design Material and system design intended for vehicle use Modular construction Designed for temporary use A detailed description of use and intended operation is included in the user manual: https://wiki.deltagarage.de/doku.php?id=vwt4schiebefenster:gebrauchsanleitung ⚠ Important safety notice regarding the use of the VenturaFlex system The VenturaFlex system is a mobile adapter for temporary power supply via a CEE camping socket with integrated residual current device (RCD). It does not replace a permanently installed shore power connection in accordance with DIN VDE 0100-721. For permanent use, an electrically conductive connection of the protective conductor (PE) to the vehicle body is required. This connection may only be established by a qualified electrician. ❗ Warning: Improper use may result in electric shock or property damage. The applicable standards and regulations for electrical installations in leisure vehicles must be observed (e.g. DIN VDE 0100-721, DIN VDE 0100-708).

The dashboard tray 2.0 Gen. 2 – variant A is a 3D‑printed in‑house development and is manufactured individually. Processing time may therefore take 3–5 working days. The stated availability is not a binding delivery time. Compatibility note: This dashboard tray is only suitable for vehicles with a soft, rounded dashboard. Not suitable for hard or angular dashboards. View version for hard dashboard Dashboard tray 2.0 Gen. 2 – variant A The tray is intended for use on the dashboard and features several open storage areas. It is intended for structured storage of items while driving or when stationary. Storage areas The design includes, among other things, two round holders as well as additional open compartments. The dimensions of the round holders are approx. 81 mm at the bottom and approx. 87 mm at the top. Further compartments are intended for smaller items. Optional use of accessories Additional components can be attached to the dashboard tray if they are suitable by design. Selection and use of accessories is at the user's own responsibility. Note on temperature exposure At high temperatures, especially in closed, unventilated vehicles, material-related deformation may occur if additional weight is attached. In such cases, it is recommended to remove optional accessories before leaving the vehicle. Mounting The tray is intended for installation on the dashboard and is fixed using double-sided adhesive tape. A rear support surface is provided by design. DIY note For users with their own 3D printer, further information on supplementary projects is available in the Delta Garage Wiki: https://wiki.deltagarage.de/doku.php?id=armaturenbrettablage:zubehoer-download Made in Germany – Deltagarage

As each tray is manufactured individually (3D printed), processing the order may take 3–5 days. The stated availability is a non-binding guideline. ATTENTION: This dashboard tray 2.0 generation 2 is only suitable for the hard and straight dashboard of the VW T4. You can find the version for the soft and rounded dashboard here. Dashboard tray 2.0 B | organiser | cup holder – suitable for VW T4 This dashboard tray 2.0 B is an in-house developed accessory solution for the hard dashboard of the VW T4. It is adapted to the contours of the dashboard and offers several separate storage areas. Storage options The tray has two cup holders designed for standard cups, bottles and cans with a lower diameter of 81 mm and an upper diameter of 87 mm. Further compartments are intended for smaller items such as tissues, sunglasses or pens. In addition, holders for shopping trolley coins are integrated. Optional accessory mount Optional accessories such as smartphone or tablet holders or other compatible attachments can be mounted on the dashboard tray. Use is at the user's own responsibility. Note At high temperatures and strong sunlight, material changes may occur in a closed and unventilated vehicle, especially with additional load from attached accessories. It is recommended to remove accessories when the vehicle is parked. Mounting The dashboard tray is installed using double-sided adhesive tape and is additionally positioned by a rear locating edge. The fit is based on a 3D scan of the corresponding VW T4 dashboard. DIY option Users with their own 3D printer can download the accessory project. Further information can be found in the Delta Garage Wiki. The dashboard tray 2.0 is a functional accessory for the VW T4 and enables structured use of the available dashboard area.

The dashboard tray 2.0 Gen. 2 – variant A is a 3D‑printed in‑house development and is manufactured individually. Processing time may therefore take 3–5 working days. The stated availability is not a binding delivery time. Compatibility note: This dashboard tray is only suitable for vehicles with a soft, rounded dashboard. Not suitable for hard or angular dashboards. View version for hard dashboard Dashboard tray 2.0 Gen. 2 – variant A The tray is intended for use on the dashboard and features several open storage areas. It is intended for structured storage of items while driving or when stationary. Storage areas The design includes, among other things, two round holders as well as additional open compartments. The dimensions of the round holders are approx. 81 mm at the bottom and approx. 87 mm at the top. Further compartments are intended for smaller items. Optional use of accessories Additional components can be attached to the dashboard tray if they are suitable by design. Selection and use of accessories is at the user's own responsibility. Note on temperature exposure At high temperatures, especially in closed, unventilated vehicles, material-related deformation may occur if additional weight is attached. In such cases, it is recommended to remove optional accessories before leaving the vehicle. Mounting The tray is intended for installation on the dashboard and is fixed using double-sided adhesive tape. A rear support surface is provided by design. DIY note For users with their own 3D printer, further information on supplementary projects is available in the Delta Garage Wiki: https://wiki.deltagarage.de/doku.php?id=armaturenbrettablage:zubehoer-download Made in Germany – Deltagarage

As each tray is manufactured individually (3D printed), processing the order may take 3–5 days. The stated availability is a non-binding guideline. ATTENTION: This dashboard tray 2.0 generation 2 is only suitable for the hard and straight dashboard of the VW T4. You can find the version for the soft and rounded dashboard here. Dashboard tray 2.0 B | organiser | cup holder – suitable for VW T4 This dashboard tray 2.0 B is an in-house developed accessory solution for the hard dashboard of the VW T4. It is adapted to the contours of the dashboard and offers several separate storage areas. Storage options The tray has two cup holders designed for standard cups, bottles and cans with a lower diameter of 81 mm and an upper diameter of 87 mm. Further compartments are intended for smaller items such as tissues, sunglasses or pens. In addition, holders for shopping trolley coins are integrated. Optional accessory mount Optional accessories such as smartphone or tablet holders or other compatible attachments can be mounted on the dashboard tray. Use is at the user's own responsibility. Note At high temperatures and strong sunlight, material changes may occur in a closed and unventilated vehicle, especially with additional load from attached accessories. It is recommended to remove accessories when the vehicle is parked. Mounting The dashboard tray is installed using double-sided adhesive tape and is additionally positioned by a rear locating edge. The fit is based on a 3D scan of the corresponding VW T4 dashboard. DIY option Users with their own 3D printer can download the accessory project. Further information can be found in the Delta Garage Wiki. The dashboard tray 2.0 is a functional accessory for the VW T4 and enables structured use of the available dashboard area.