GFK-Kotflügel für VW T4 – 15″ & 16″ für langen Vorderwagen fertig
GFK-Kotflügel für VW T4 – 15″ & 16″ für langen Vorderwagen fertig
Ein weiterer wichtiger Schritt bei der Entwicklung unserer GFK-Karosserieteile für den VW T4 ist geschafft: Die GFK-Kotflügel für den langen Vorderwagen sind fertig entwickelt und sowohl für die 15-Zoll- als auch für die 16-Zoll-Ausführung erhältlich.
Vier Varianten für den langen Vorderwagen
Aktuell stehen folgende Ausführungen zur Verfügung:
- 15″ – Fahrerseite links
- 15″ – Beifahrerseite rechts
- 16″ – Fahrerseite links
- 16″ – Beifahrerseite rechts
Vom Entwicklungsprojekt zum fertigen GFK-Kotflügel
Bereits 2025 haben wir über die Entwicklung unserer neuen Kotflügel berichtet. Inzwischen wurde aus dem Entwicklungsprojekt ein fertiges Produkt.
Neben Konstruktion, Formenbau und zahlreichen Anpassungen gehörte dazu auch das entsprechende Genehmigungsverfahren. Die Kotflügel verfügen über die erforderliche Teiletypgenehmigung und werden mit der entsprechenden Kennzeichnung und den zugehörigen Unterlagen ausgeliefert.
Damit können die GFK-Kotflügel entsprechend der zugehörigen Genehmigung ohne zusätzliche Einzelabnahme verwendet werden.
Warum GFK statt Stahl?
Die vorderen Kotflügel gehören beim VW T4 zu den bekannten Problemstellen. Besonders im unteren Bereich können sich Schmutz und Feuchtigkeit sammeln – mit den bekannten Folgen für einen Kotflügel aus Stahl.
Bei unserer Neuentwicklung haben wir uns deshalb bewusst für glasfaserverstärkten Kunststoff entschieden. Das GFK-Bauteil selbst kann nicht wie ein Stahlkotflügel rosten.
Die Kotflügel werden aus GFK mit Epoxidharz gefertigt und bereits 2K-gefüllert und grundiert ausgeliefert. Damit sind sie für die weitere Vorbereitung und Lackierung vorbereitet.
15″ und 16″ – unterschiedliche Radläufe
Beim VW T4 mit langem Vorderwagen muss zwischen der 15-Zoll- und der 16-Zoll-Ausführung unterschieden werden. Die 16-Zoll-Version besitzt einen entsprechend anders ausgeführten Radlauf.
Deshalb haben wir beide Versionen separat umgesetzt. Vor der Bestellung sollte geprüft werden, welche Ausführung für das jeweilige Fahrzeug benötigt wird.
Als Nächstes: GFK-Kotflügel für den kurzen Vorderwagen
Mit dem langen Vorderwagen ist die Entwicklung noch nicht beendet. Aktuell arbeiten wir bereits an den entsprechenden GFK-Kotflügeln für den VW T4 mit kurzem Vorderwagen.
Wenn die Entwicklung und die abschließenden Arbeiten planmäßig verlaufen, sollen auch diese Varianten bis Mitte/Ende Herbst 2026 fertiggestellt werden.
Weitere Informationen und verfügbare Varianten
Ausführliche Informationen zur Entwicklung und Zulassung findet ihr in unserem ausführlichen Beitrag auf Deltabus .
Die bereits verfügbaren GFK-Kotflügel für den VW T4 mit langem Vorderwagen in 15″ und 16″ findet ihr direkt bei Delta Garage.
Related products
GRP wings – ready for painting & with ABE / ECE, suitable for VW T4 Note: To the best of our current knowledge, these GRP wings are among the few versions available on the market with ABE or ECE approval for vehicles intended for the VW T4. Approval was obtained as part of a months-long development and testing process. With the existing ABE / ECE approval, the wings are approved for use on public roads. According to the information in the approval, no additional registration is required provided installation is carried out in accordance with the conditions. The GRP wings are manufactured in Germany by an experienced manufacturer that has been producing components for road and motorsport applications for many years. Made from high-quality glass-fibre reinforced plastic (GRP), the wings are supplied filled and ready for painting. The surface is prepared for professional final painting in automotive applications. Precise manufacturing ensures high dimensional accuracy and a clean fit. The wings are suitable both for standard operation and for vehicles with modified wheel/tyre combinations. GRP wings, suitable for VW T4 Prepared for painting (filled) With ABE / ECE approval for road use No additional registration required (if conditions are observed) Manufactured in Germany Note on painting: Final painting is required. Before painting, a fine intermediate sanding according to the specifications of the respective paint manufacturer is recommended.
Available, delivery time: 1-3 days
GRP wings – ready for painting & with ABE / ECE, suitable for VW T4 Note: To the best of our current knowledge, these GRP wings are among the few versions available on the market with ABE or ECE approval for vehicles intended for the VW T4. Approval was obtained as part of a months-long development and testing process. With the existing ABE / ECE approval, the wings are approved for use on public roads. According to the information in the approval, no additional registration is required provided installation is carried out in accordance with the conditions. The GRP wings are manufactured in Germany by an experienced manufacturer that has been producing components for road and motorsport applications for many years. Made from high-quality glass-fibre reinforced plastic (GRP), the wings are supplied filled and ready for painting. The surface is prepared for professional final painting in automotive applications. Precise manufacturing ensures high dimensional accuracy and a clean fit. The wings are suitable both for standard operation and for vehicles with modified wheel/tyre combinations. GRP wings, suitable for VW T4 Prepared for painting (filled) With ABE / ECE approval for road use No additional registration required (if conditions are observed) Manufactured in Germany Note on painting: Final painting is required. Before painting, a fine intermediate sanding according to the specifications of the respective paint manufacturer is recommended.
Available, delivery time: 1-3 days
GRP wings – ready for painting & with ABE / ECE, suitable for VW T4 Note: To the best of our current knowledge, these GRP wings are among the few versions available on the market with ABE or ECE approval for vehicles intended for the VW T4. Approval was obtained as part of a months-long development and testing process. With the existing ABE / ECE approval, the wings are approved for use on public roads. According to the information in the approval, no additional registration is required provided installation is carried out in accordance with the conditions. The GRP wings are manufactured in Germany by an experienced manufacturer that has been producing components for road and motorsport applications for many years. Made from high-quality glass-fibre reinforced plastic (GRP), the wings are supplied filled and ready for painting. The surface is prepared for professional final painting in automotive applications. Precise manufacturing ensures high dimensional accuracy and a clean fit. The wings are suitable both for standard operation and for vehicles with modified wheel/tyre combinations. GRP wings, suitable for VW T4 Prepared for painting (filled) With ABE / ECE approval for road use No additional registration required (if conditions are observed) Manufactured in Germany Note on painting: Final painting is required. Before painting, a fine intermediate sanding according to the specifications of the respective paint manufacturer is recommended.
Available, delivery time: 1-3 days
GRP wings – ready for painting & with ABE / ECE, suitable for VW T4 Note: To the best of our current knowledge, these GRP wings are among the few versions available on the market with ABE or ECE approval for vehicles intended for the VW T4. Approval was obtained as part of a months-long development and testing process. With the existing ABE / ECE approval, the wings are approved for use on public roads. According to the information in the approval, no additional registration is required provided installation is carried out in accordance with the conditions. The GRP wings are manufactured in Germany by an experienced manufacturer that has been producing components for road and motorsport applications for many years. Made from high-quality glass-fibre reinforced plastic (GRP), the wings are supplied filled and ready for painting. The surface is prepared for professional final painting in automotive applications. Precise manufacturing ensures high dimensional accuracy and a clean fit. The wings are suitable both for standard operation and for vehicles with modified wheel/tyre combinations. GRP wings, suitable for VW T4 Prepared for painting (filled) With ABE / ECE approval for road use No additional registration required (if conditions are observed) Manufactured in Germany Note on painting: Final painting is required. Before painting, a fine intermediate sanding according to the specifications of the respective paint manufacturer is recommended.
Available, delivery time: 1-3 days
New in Our Shop: Retaining Wedges J and K – Suitable for VW T4 Tailgate Trim
Performance-Downpipe für VW T4 AXG, AHY & AXL – jetzt regulär erhältlich
Lüftungsdüsen für VW T4 – jetzt für hartes und weiches Armaturenbrett
Delta Garage News | Entwicklung - Nachrichten und Informatio